Click a map to get instant driving directions from your location:
Crane Tech Training
4951 Adamo Dr, Tampa, FL 33605Suite
238
800-290-0007
813-248-4800
Directions to:
Tampa Training
Center, Tampa, FL
Directions to:
Comfort Suites
- La Porte, TX
Directions to Tampa
Training Center
Driving From The North:
When heading south on Interstate 95: Heading south on
I-95 take I-4 West to Orlando/Tampa. Continue on I-4 to exit number
3 (US Hwy-41/50th Street exit). Turn left at the bottom of the exit
number 3 ramp heading south on US Hwy-41/50th Street. Right turn
onto Adamo Drive (FL-60 W). Take first left at break in median, up
drive to second building
on left.
When
heading south on Interstate 75:
Heading south on I-75 take I-4 West exit toward Tampa. Continue on
I-4 to exit number 3 (US Hwy- 41/50th Street exit). Turn left at
the bottom of the exit number 3 ramp heading south on US Hwy-41/50th
Street. Right turn onto Adamo Drive ( FL-60 W). Take first left at
break in median, up drive to second building
on left.
Driving From the South:
Use I-75
North to I-4 West:
Continue on I-4 to exit number 3 (US Hwy- 41/50th Street exit).
Turn left at the bottom of the exit number 3 ramp heading south on
US Hwy-41/50th Street. Right turn onto Adamo Drive ( FL-60 W). Take
first left at break in median, up drive to second building on left.
Flying To Tampa:
From Tampa International:
Due to significant construction between Tampa International
Airport and Crane Tech offices we suggest you follow these
directions. On line directions are currently showing exits
that are under construction or removed entirely.
1. Exit Tampa International Airport to I-275 North. Staying
left out of the airport will initially put you on Highway 60 North,
leading you to the exit for I-275 North.
2. Take the I-275 North exit (to the right) and stay on I-275 to
I-4.
3. Exit on I-4. This is the western end of I-4 and
only one way to go... to the right. Signage shows this exit
for Orlando.
4. From I-4 take the 50th Street exit. This exit will exit
to the right and then bend left. At the traffic light turn
right onto 50th Street. (50th Street is also Hwy 41)
5. Stay on 50th street until you come to Highway 60, also
called Adamo Drive.
6. Turn right on Adamo Drive and immediately get into the
left lane.
Take the first left at break in median, up drive to second building
on left.
Approximate miles from Tampa
International Airport to Crane Tech offices is 10.5 miles.
Depending on traffic the drive is less than 20 minutes.
|
